Avatar Teleoperation — Upper-Body

Name: Avatar Teleoperation — Upper-Body
Brand: twisted-print-co.
Price: 2999.0 USD
Availability: InStock

$2,999.00

$2,999.00 ~~$0.00~~

SAVE % Sold out

Product variants

Quantity

Avatar Teleoperation — Upper-Body

$2,999.00

$2,999.00 ~~$0.00~~

SAVE % Sold out

Get it within 4 to 7 business days.

Upper-Body VR Control for Humanoid Robot Interaction

Configure immersive VR control capabilities that allow operators to control humanoid robot arms and hands through mapped upper-body movements.

Avatar Teleoperation — Upper-Body enables manipulation workflows, demonstrations, training, and research scenarios without requiring a full-body teleoperation setup.

Bring Human Dexterity to Robotic Manipulation

Avatar Teleoperation — Upper-Body connects operator movements with compatible humanoid robot upper-body functions through VR-based control.

The configuration enables teams to explore robotic manipulation, human-robot interaction, and skill transfer workflows by adapting existing robot capabilities for specific applications.

Supported Humanoid Platforms

Platform	Compatibility
Unitree G1-D	Supported
Unitree G1 U1	Supported
Unitree G1 EDU U2	Supported
Unitree R1 EDU U2	Supported

Important: Compatible humanoid robot hardware is not included in the configuration price.

Key Capabilities:

Upper-Body Motion Mapping

Maps operator upper-body movements to compatible humanoid robot actions, supporting controlled arm and hand interaction.

VR-Based Robot Control

Provides an immersive operator interface for controlling robotic manipulation workflows.

Arm Control

Enables mapped control of humanoid robot arms for interaction and manipulation scenarios.

Hand & Grasping Support

Supports robotic hand control and assisted grasping workflows depending on the installed robot configuration.

Demonstration & Training Workflows

Allows teams to demonstrate robotic capabilities and capture operator-driven interaction scenarios.

Session Recording & Replay

Capture and review teleoperation sessions for training, analysis, and research purposes.

What's Included:

01
VR teleoperation setup

02
Upper-body motion mapping configuration

03
Controller and tracking setup

04
Robot compatibility assessment

05
System calibration support

06
Deployment preparation guidance

How It Works:

1. Compatibility review

Futurology evaluates robot configuration, supported hardware, and intended application requirements.

2. VR calibration & control setup

Configure tracking devices, upper-body motion mapping, and operational parameters.

3. Manipulation testing

Validate arm movement, interaction workflows, and control response in a supervised environment.

4. Deployment preparation

Prepare the configured workflow for research, education, demonstrations, or approved applications.

Hardware Requirements:

Category	Requirements
Required	Compatible Unitree humanoid robot Supported VR hardware Appropriate hand configuration (where applicable) Controlled indoor operating environment
Recommended	PICO / Meta Quest VR headset (confirmed during scoping) Ubuntu workstation for development and monitoring Field routers Monitoring displays
Customer-Provided	Robot hardware Network infrastructure Existing VR devices

Use Cases:

Research Labs

Explore human-robot motion transfer, teleoperation workflows, and robotic behavior studies.

Robotics Education

Provide students with hands-on experience in humanoid robot control and interaction.

Demonstration Teams

Create immersive experiences showcasing humanoid robot capabilities.

Training & Simulation

Record and analyze operator sessions for learning and evaluation.

Safety Requirements:

Controlled indoor environments with defined safety zones
Trained operator/instructor required at all times
Clear E-stop points (robot, operator, supervising operator)
Internet teleoperation limited to latency-tolerant tasks with network pre-qualification

Ongoing Support:

Keep Your Robotic Workflow Optimized

Futurology provides optional ongoing support to help maintain and optimize Avatar Teleoperation deployments.

Support may include:

Configuration adjustments
Technical reviews
Deployment reassessment after hardware or environment changes
Workflow optimization

Support retainer: $499/month

FAQ:

1. Which robots does Avatar Teleoperation support?

Avatar Teleoperation is configured and tested for compatible Unitree humanoid platforms, including G1 U1, G1 EDU U2, and R1 EDU U2 variants.

2. Which VR headsets can I use?

Supported VR headsets include PICO and Meta Quest devices. Compatibility is confirmed during the technical review process.

3. What's the difference between local and internet teleoperation?

Local teleoperation allows the operator and robot to operate in the same physical environment and network.

Internet teleoperation enables remote operation over a network connection but requires evaluation of latency, bandwidth, and stability.

4. What network quality is required?

Network requirements depend on the deployment scenario. Futurology evaluates latency, bandwidth, and connection stability during technical review.

5. How do safety boundaries and emergency stops work?

Safety zones are configured during setup to define operating limits. Emergency stop controls remain available to the operator, supervising personnel, and the robot system.

6. Can students use Avatar Teleoperation in classrooms?

Yes. Avatar Teleoperation can support educational scenarios when operated with trained supervision and appropriate safety configuration.

7. What tasks are suitable for Avatar Teleoperation?

Suitable scenarios include:

Demonstrations
Motion data collection
Training
Research workflows
Telepresence
Controlled inspection scenarios

The system is not intended for hazardous or unsupervised operations.

8. How does session recording work?

Teleoperation sessions can be recorded for analysis, training, and research. Storage and data management depend on the customer’s infrastructure.

9. What happens if the robot or environment changes?

A technical reassessment may be required if robot configuration, firmware, hardware setup, or operating environment changes.

View full details

🚚 Free Shipping on All Orders!

3D PRINTING & ORDER SUPPORT

NEED HELP WITH YOUR ORDER?

Questions about materials, custom 3D prints, or order status? We're here to help!

Frequently Asked Questions

What materials do you use for 3D printing?

We use premium PLA, PETG, and high-quality resins depending on product specs to ensure durability and crisp detail.

How fast do orders ship?

Standard orders ship within 1–2 business days. Custom prints or larger batches take 2–4 business days before dispatch.

Do you accept custom 3D print requests?

Yes! Send us your file or project details through the support form, and our tech team will get back to you with a quote.

Contact Support

Twisted Print Co. ★★★★★ 5.0

Verified Store · 2522 N Main St, Hutchinson, KS

🔒 Encrypted Checkout · 🚚 Fast US Shipping · ⭐ 5.0★ Verified Quality

Your cart is empty

Your cart

Subtotal

Menu

Avatar Teleoperation — Upper-Body